Details:
Emergency power supply EPS, reflects the current world's most advanced power electronics technology, is a full-featured, high performance uninterruptible power supply, high efficiency, high reliability, high intelligence advantages. We are very pleased to provide you with the products, I hope that in the future to provide you with convenient, reliable service, ensure that your equipment safety operation.
◆ emergency unit is microprocessor controlled SPWM technology, pure sine wave output waveform, pure
◆ unique dynamic current loop control technology to ensure the reliable operation of the emergency device
◆ the load adaptability is strong, including a capacitive, inductive, mixed load
◆ overload capacity and strong shock resistance ability
With the input, output, under voltage, over voltage, over temperature, over loading protection function
◆ emergency power supply front panel has LCD, LED dual display mode, state stick out a mile
◆ high efficiency ( non emergency power supply, no power is consumed ), low noise, no smoke, no fire contained hidden trouble
◆ automatic switching, unattended operation can be achieved
The performance is stable, safe and reliable, long service life
The appearance of the product
This chart for reference only, refer to the actual product.
|
Company （mm）
|
Cabinet type
|
|
Wide （W）
|
500
|
|
High （H）
|
1520
|
|
Deep （L）
|
800
|
Main technical parameters of CT series of emergency power supply
|
Type number
|
CT-EPS-（3KW～60KW)/380V
|
|
DC INPUT
|
Rated voltage
|
96V/192V/216V/480V
|
|
Cell number
|
12V×8 each /12V×16 each /12V×18 each /12V×40 each
|
|
Battery type
|
Maintenance free lead-acid battery
|
|
AC INPUT
|
Phase number
|
Three phase five line
|
|
Frequency rate
|
50Hz ± 5％
|
|
Voltage range
|
380VAC± 20％
|
|
Emergency OUTPUT
|
Rated power
|
3～60KW
|
|
Rated voltage
|
380VAC
|
|
Voltage accuracy
|
380VAC ± 2％
|
|
Frequency rate
|
50Hz ± 1％
|
|
Waveform distortion
|
≤5％（ Linear load ）
|
|
Dynamic response
|
5%（0%-100% Load ）
|
|
Peak factor ( CF )
|
3：1
|
|
The efficiency of emergency
|
87%
|
|
Switching time
|
＜200Ms
|
|
Alarm
|
The LED indicator light alarm and liquid crystal display text alarm
|
|
Charging voltage
|
108±0.8V/216±0.8V/243±0.8V/530±0.8V
|
|
Dielectric strength
|
1500 VAC， 1min （INUPT AND OUTPUT）
|
|
Cooling mode
|
Fan forced air cooling
|
|
Discharge time
|
According to the battery capacity of the
|
Work environment
The use of this product please as far as possible to meet the following requirements:
◆ in clean dirt and dry and ventilated places ( in the spacious room installation of this product, the room installation of mandatory ventilation equipment )
◆ suitable temperature (emergency power supply in -10℃ ~ 40 ℃indoor environment to run, but was open when the temperature is higher than 0 ℃best, desired operating temperature of 10℃ ~ 25℃)
The relative humidity to meet the requirements of (10%～90%) no condensation
◆ elevation≤ 1000m altitude of more than 1000meters, recommend reducing machine rated capacity use (see GB3859.2)
◆ waterless steam or other corrosive gases, the near absence of flammable and explosive materials
◆ in compliance with safety regulations of the preceding stage power
|
